We have a huge range of gas fittings available to suit the majority of Gas Appliances, BBQ’s, Cookers and Caravans.
These include: Brass Nipples, Bushes, Compression Fittings, Couplings, Elbows, Hose Assembly, Hose Connectors
All with FREE DELIVERY in Cornwall.
Gas Spanners (2)
Jubilee Clips (1)
Pol Fittings (3)
Stop Ends (2)
Brass Nipples (2)
Bulkhead Fittings (2)
Brass Bushes (4)
Compression Fittings (19)
Cooker Kits & Fittings (3)
Quick Fit Couplings (7)
Brass Elbows (4)
Hose Assembly (2)
Hose Connectors & Nozzles (32)
Lever Handles (4)
Metric Elbows & Tees (2)
Brass Olives (3)
Quick Release Connectors (8)
Brass Reducers (6)
Rubber Washers & Seals (3)
Straight Connectors (8)
Isolation Valves (5)
We have an extensive range of gas fittings available. Our fittings suit the majority of Gas Appliances, BBQ’s Cookers, Caravans, Static and Mobile Homes.
Brass nipples have many uses, typically to connect two pieces of copper piping, connect to a valve or hose end.
We have a range of Bulkhead Fittings. These fittings are designed to pass through a wall. These fittings can be used for automotive, boat, motorhome applications. These fittings come with copper olives to ensure a tight fit.
Compression fittings can be used to connect two pieces of pip together or to connect two dissimilar pipes together. These fittings come with a copper olive to aid pipe fitting which creates a tight seal. There is no need to use any type of sealant or jointing tape with these fittings. It is important not to over-tighten the nuts as this may deform the ferrule inside the joint.
Uk regulations state that any cooker fitted must have a chain kit installed to stop the cooker from tilting or being removed far enough from the wall to put stress on the hose connection. Our cooker chain kits will ensure safety in your kitchen. Many home insurance policies state that you must have one of these kits installed to be covered.
Couplings & Quick Release Nozzles
Our quick release hose nozzles allow you to remove your hose quickly and safely. Ideal if your storing a gas bottle under a BBQ or a fixed wall point. We also have a standard Micropoint Bayonet fitting for cooker connection and installation.
Brass Elbow are simply used to change the direction of flow to a 90 or 45 degree angle. They come as threaded, solder ring or dual connection (Soldered to thread). We also have compression elbows and a tap elbow to create an outside water source for the garden.
Our hose assemblies have pre fitted brass fittings to regular orange high pressure hoses, making fitting easy.
Hose Connectors & Nozzles
We have various nozzles available for multiple uses. These include hose connectors, Fullham Gas nozzles, quick release couplings, y connectors and t nozzles.
Lever handles are used to control flow allowing you to reduce the flow level or completely shut it off when needed.
Our olives are used to create a tight seal around any copper piping in your compression fitting.
Reducers are used to change the pipe size to meet the requirement of the system you are connecting too or to adapt an existing system to a different flow size.
If you need a rubber seal or washer, we have a number available for plumbing or gas regulator purposes.